The BIG one
This pump was developed for sludge with large particles and high flow rates. Based on the smaller KS23 ends, this pump has connections from DN250 to DN350. 80 liters per stroke are pumped from the D320 mm delivery pipe at a maximum pressure of 16 bar.
Web visualization
Like every other machine from Finsterwalder Umwelttechnik, the KS32 gate valve pump has a touch panel on the control cabinet and web visualization. The machine can be easily controlled and settings can be made via the web HMI using any internet-enabled device. The process can also be monitored via this interface to ensure process reliability.
Technical data
- Connection on the suction side: DN250/DN300/DN350
- Connection on the pressure side: DN250/DN300/DN350
- Flow rate: 30 m3/h
- Fluid/semifluid material, typical dry matter content 7-25%
- Ball passage: max. 320 mm
- Delivery pressure: 16 bar
- Power requirement 5.5 kWel
- Temperature of the substrate: 95 °C
- Dimensions (LXB): 4,309×926 mm
- Special feature: Low pulsation pumping
Hydraulic power unit
The hydraulic power unit drives both the KS32 and the KS23 and can also actuate other valves in the system. It has a 350-600 l oil tank, a WHG-
oil pan and consists of three oil circuits.
Similar products
Individual requirements also call for specific solutions. Our product range offers applications for a wide variety of process areas and can be adapted to your requirements. Find out more about the products we have developed and tested in our own plant.
